How to Conduct an Easy DIY Skirting Board Painting Project?

DIY skirting board painting
Source: https://www.youtube.com/watch?v=cSqkobUoq_A

It is always simpler to paint or stain new skirting before attaching it to the wall. However, if you are repainting already-installed skirting, you do not have that option. It isn’t easy, especially for a DIY project, to paint a skirting board that has already been installed. However, this guide will enable you to paint your skirting boards successfully.

Before starting

You should choose your paint color first. Generally speaking, the skirting board color should complement the color of the wall. A space will appear larger and more contemporary if the skirting boards are lighter in color. Since gloss coatings are more durable than other finishes, they work well for skirting boards. If you don’t want an utterly glossy look, satin finishes are more subdued yet resistant to dents and scratches.

Interesting Article: Tips To Find The Best Painter for your House

Preparation

Like all well-done projects, painting your baseboards will require some planning. What to do is as follows:

Sand and Clean

Sand and clean your skirting board first. The ultimate appearance and polish will be affected by how well the board is smoothed, and any defects are removed through sanding. Additionally, it facilitates paint adhesion to the surface, reducing waste. After sanding, you will have to tidy up since there will be dust throughout. Utilize a vacuum to remove all the dust, focusing on spaces between the baseboard and the floor where dust tends to collect. Use a soft sponge plus clean water to rinse the surface after vacuuming. Allow it to dry after that since moisture will harm the paint job.

Preparing the surroundings

You wouldn’t want the paint on the carpet or floor nearby. You can use plastic sheets to prevent this. Make sure there aren’t any open places by covering the carpet or floor in the area with plastic sheets. You might want to check for specialized carpet covers in your neighborhood store if you own a delicate carpet. If necessary, secure items using masking tape to prevent movement due to wind or scuffing.

Read More: Best 8 Painting Tips Faux Techniques for Your Walls

Apply Primer

The skirting board must be primed before moving on. With the use of a primer, a surface can be made smoother and more paint will adhere to it more effectively. It also assists in hiding any old stains or streaks. Only a primer and a new brush are required.

You May Also Like: The Ultimate Guide To Commercial Painting Contractor

Applying your paint

It is okay to start painting the skirting board after thoroughly preparing it. It is advised to use modest amounts of paint to avoid dripping during painting. If the previous paint had a dark tone, you might have to apply two layers of paint while painting something white. Your prepared skirting board should be lightly sanded and cleaned before beginning with the first coat of the paint of your choice. Apply your preferred color in at least two coats, sanding & cleaning in between. Choose a synthetic-bristled brush when your paint is water-based since natural bristles often absorb too much paint and produce a streaky appearance. After painting, look for drips and remove them for a nice, even surface. Once everything is finished, remove the tapes from the wall and the nearby floor/carpet and let the skirting boards dry.

Your do-it-yourself undertaking will be a success if you adhere to the preceding guidelines. However, it would be preferable to enlist the help of experts if you run into any difficulties along the route.